Thursday, December 4, 2014
Friday, November 28, 2014
[Root] step by step Manual i8190 (N,L,T,I) Galaxy S3 Mini
RecoveryDownload Odin3 .
I made an Odin version for the official CWM.recovery-clockwork-touch-6.0.2.7-golden.tar.md5
Or maybe you prefer twrp-2.4.2.0-golden.tar from TWRP official site.
With your phone, download UPDATE-SuperSu-v1.10.zip to your sdcard. (Or to computer and transfer it to phone by yourself)
Open Odin as admin. Push [PDA] and select "recovery-clockwork-touch-6.0.2.7-golden.tar.md5" or "openrecovery-twrp-2.4.2.0-golden.tar"
Put your phone in download mode by pressing vol- / home / power at the same time, and connect it to computer.
When recognized by Odin push [START].
root!
Reboot your phone in recovery mode by pressing vol+ / home / power at the same time.
Keep pushing...If it boots normal ,Download this file
I8190.tar - Download - 4shared?
and flash it as PDA, then come back and continue here.
In CWM choose "install zip from sdcard" & "choose zip from sdcard" or "choose zip from external sdcard" Depends on where you saved UPDATE-SuperSu-v1.10.zip.
Browse to that zip-file and confirm with Yes.
Reboot and go to google play to install SuperSu.
You now got ROOT and CWM!
Only thing left is to wipe out that ugly custom binary count by go here and download Triangle Away, and give Chainfire a thank for both root and Triangle Away as well.
Dead boot repair done Samsung I9103 sucessfully wit free tool Tested by me
This tool can fix it by USB cable only so no need to disassemble the phone and no need to use JTAG boxes even.To use this tool you need to enter APX mode ( Volume Up key + Home Key ) then connect USB cable to Phone.
After you repair the dead phone it will be into Download Mode, So you can Flash it with Original Firmware.
update the driver manually goto device manager/APX drive right click nd show d path 2 update. driver is included n d zip file.
Then run the GT-I9103 windows batch file there type 1 and press enter nd it vil start d process.
after finish it vil go into odin download mode .use odin nd update using original stock firmware below given.
Download: Samsung I9103 Galaxy R Dead Phone Fix by USB
Firmware Download
Odin Download
Pit file Download
Samsung Galaxy S3 Neo GT-I9300I Dead Boot Repair
Samsung Galaxy S3 Neo GT-I9300I Dead Boot Repair
SamsungGalaxy S3 Neo GT-I9300I Dead Boot Repair
REQUIRMENTS
1) 16 GB SD card
2) Win32DiskImager
3) unbrick file
4) odin and stock firmware
Download Win32DiskImager
Download unbrick file
Download Odin
Download Stock Firmware
For 4 file repair firmware Search tis file I9300IXXUAND1_I9300IOJVAND1 in z3x support or HWK support
Procedure
1) install the Win32DiskImager
2) download and extract the debrick.zip u will find a debrick.img
3) insert sd card (16 GB class 4 or 10) and format it
4) open Win32DiskImager
5) open img file and write to sd card
6) after complete remove sd card from pc and insert it into your neo
7) insert back the battery and press vol down + home + power button
8) u will get into download mode
9) now remove your sd card from mobile
10) open odin and add your firmware and flash
P3100 repair dead boot:
https://www.rapidshare.com/share/409...4040375B87A9B8Dead Boot Recovery - SM-N910F SM-N9109W SM-N910A SM-N915D SM-N9108V SM-N9100 SM-G901F
Dead Boot Recovery - SM-N910F SM-N9109W SM-N910A SM-N915D SM-N9108V SM-N9100 SM-G901Fi9300 and n7100 bootrepair Note 2 s3
https://mega.co.nz/#!Z893RbyQ!YJOOqh...OxcOJ9SPNmMwGwOriginal thread:
gt-n7100 bootrepair Note 2
Or
Samsung s3 i9300 & Note2 N7100 Dead boot solution & imei null solution s3
Samsung s3 i9300 & Note2 N7100 Dead boot repair solution & imei null solution only for i9300
Credits go to jamesjerss, original author of this post which been copied here from another forum
Procedure:
* Download samsung s3 boot card maker Here
* Extract it on desktop
* Take a card reader insert memory card into the card reader nd connect it to the pc
* From the extracted folder run Diskdump2.exe
* Select generic storage Device. pictures below follw it
Credits go to jamesjerss, original author of this post which been copied here from another forum
Procedure:
* Download samsung s3 boot card maker Here
* Extract it on desktop
* Take a card reader insert memory card into the card reader nd connect it to the pc
* From the extracted folder run Diskdump2.exe
* Select generic storage Device. pictures below follw it
* Now to write the scripts folle the below given picr
Now done yu are succesfully created Dead boot memorycard
To continue further
Requerments:
* Z3X samsung Box or SPT Box (i used z3x)
* special UART Cable (300k or 500k uartcable)
* Download teraterm-4.78 From Here
* Fully charged battery
Dead boot Reapairing procedure
* Download nd extract teraterm-4.78 on desktop
* From extracted folder run ttermpro.exe there select serial port nd change the serial port to z3x serial
port lik below givin in the picr
*After Select The Serial Port Press Ok Button den Go To Setup Click Serial Port Option
Select Baud Rate 115200 Then Press Ok Button lik below givn in the picr
* Now insert the created boot card to the mobile
* Connect the Uart cable via z3x box
* Now Insert the battery nd wait for 5min if the procces didnt start discnnt the mobile close ttermpro agin try it.
* if it run success yu vil the result below given lik this.
Quote:
Code:
pit_check_integrity: invalid pit.(0x0) pit_check_integrity: invalid pit.(0x0) update_guid_partition_table: There is no pit binary. fsd_reclaim 1283: MST is not recognized(mst.magic=0x0) fsd_reclaim 1284: MST is not recognized fsd_reclaim 1599: Error(nErr=0x0) fsd_reclaim 1604: j4fs_rw_start is set to default value(128KB) j4fs_open 153: Error(nErr=0x40000000) j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: 'param.j4fs' does not exist, make new one.. j4fs_write_file_bootloader 184: j4fs panic fail j4fs_read_file_bootloader 355: j4fs panic load_j4fs_param: debug level file does not exist..*INCORRECT!* init_fuel_gauge: battery is not detected, do not init fuelgauge init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL1:0x1b init_microusb_ic: MUIC: CONTROL2:0x3b init_microusb_ic: MUIC: CONTROL2:0x3a PMIC_ID = 0x2 PMIC_IRQSRC = 0x0 PMIC_STATUS1 = 0x10 PMIC_STATUS2 = 0x0 PMIC_PWRON = 0x2 PMIC_IRQ1 = 0x27 PMIC_IRQ2 = 0x0 s5p_check_keypad: keypad value=0x0 s5p_check_reboot_mode: INFORM3 = 0 ... skip s5p_check_upload: MAGIC CODE=d1b0f038 microusb_get_attached_device: STATUS1:0x3c, 2:0x0 s5p_check_download: update mode=0 j4fs_read_file_bootloader 355: j4fs panic s5p_check_tzsw: invalid tzsw type! dummy? scr_draw_image: draw 'download_error.jpg'... j4fs_read_file_bootloader 355: j4fs panic read_param_file: 'download_error.jpg' j4fs read failed! fimd_div:13, div:1, FB_SOURCE_CLOCK:800000000, FB_PIXEL_CLOCK:57153600 a2, 60, 90,
* if yu get this error at the end [Patch Stop] This is not Rom Code. yu cant fix yur mobile yu have to change yur emmc chip
Quote:
Code:
TN default <OK> <OK> [DVFS] INT(1) : 0 DRAM Type : LPDDR2 8G [DVFS] MIF(3) : 0 [EPLL][VPLL][CLK_DIV] OK <OK> [LOCK SW/HW]ARM:0/0 INT:0/0 G3D:0/0 MIF:0/0 SHIFT:0/0 [DVFS] ARM(0) : 5 [DVFS] INT(1) : 0 [DVFS] G3D(2) : 0 [DVFS] MIF(3) : 0 [SD_INIT SDMMC_HighSpeedONE] SD_READ: 20000 20000 0x40008000 -> 668484 usec <OK> Inp32(uAddr) : 0xea00007e FW Booting [Patch Stop] This is not Rom Code.
* After done this yur mobile must me n download mode or white screen if white screen manually put into download mode.
* After dead boot repair mine white screen i manually put into download mode pir below
* Now update your mobile with factory firmware with PIT file lik below given n the picr.Factory firmware Download Here
* After update complete yur mobile may not have imei .imei null or yur mobile will not boot bcoz of dead boot repair. yur efs must be corrupted
* To Fix this prob first root yur mobile Download from here (flash it through odin select as odin)
* Now Download this EfS repair file nd flash it through odin select as odin yur mobile must boot
but the imei become lik this 004999010640000
I9300_Repair_efs.tar.rar
* if yur imei is null yu cant repair using this box so 1st yu have to repair the efs using above givn file. if yur imei bcome lik tis oly (004999010640000) yu can repair using z3x or othr samsung tool
* Now follw the picr to repair imei problem.
* After IMEI Repair
note 4 boot repair recovery
https://www.mediafire.com/?k5wd6zs1iik8a1yOriginal thread:
Samsung note 4 boot repair for all qualcome series.. here
apple i cloud activation
Too many users are complaining about not being able to activate iDevices after update , and being asked for an Apple ID Activation , here is a little guide about this problem and its resolution :How does Activation Lock work?
When you enable Find My iPhone on your iPhone, iPad, or iPod touch running iOS 7, your Apple ID is securely stored on Apple’s activation servers and linked to your device. From that point on, your password will be required before anyone can turn off Find My iPhone on your device, erase your device, or reactivate and use your device.
Activation Lock is enabled automatically when you turn on Find My iPhone in iOS 7, or when you upgrade to iOS 7 from a previous version of iOS that has Find My iPhone already turned on.
To turn on Find My iPhone on your device:
Go to Settings.
Tap iCloud.
Sign in with your Apple ID, if necessary.
Turn on Find My iPhone.
What if I forget my Apple ID password?
If you forget your password, you can reset it at My Apple ID (appleid.apple.com) or by contacting Apple Support and verifying your identity. Once your password has been reset, it will work normally with Find My iPhone and Activation Lock.
If you forget your password and cannot reset it, you will lose access to your Apple ID and may be unable to use or reactivate your device. To help prevent this, visit My Apple ID periodically to review and update your account information.
What if I purchase a device that is still linked to the previous owner's account?
Contact the previous owner as soon as possible and ask them to erase the device and remove it from their account. For complete instructions, read how to remove a device from a previous owner's account. ( Find My iPhone Activation Lock: Removing a device from a previous owner?s account ) .
Resolution
If the device has already been erased
If the device has already been erased, but is still linked to the previous owner’s account, you will be prompted for the previous owner’s Apple ID and password during the device setup and activation process (shown below).
If the previous owner is with you and can access the device
Ask them to enter their Apple ID and password on the Activate iPhone screen (shown above) to remove the device from their account. You can then proceed through the rest of the device setup process.
If the previous owner is not present
Contact them and ask them to follow these steps to remove the device from their account:
Sign in to their iCloud account at www.icloud.com/find.
Choose the device from their Find My iPhone device list by clicking All Devices and selecting the correct device.
Click "Remove from Account" to remove the device from the account.
After the device has been removed from the previous owner’s account, turn it off by pressing and holding the Sleep/Wake button located on the top right side of the device. Then restart your device and proceed with device setup as you would normally.
If the device has not been erased
If the device has not been erased, you will be able to access either the Home or Lock screen as shown below.
If the previous owner is with you and can access the device
Ask them to erase all content and settings by choosing Settings > General > Reset > Erase All Content and Settings. They will need to provide their Apple ID and password. After the device has been erased, you will be able to proceed with the device setup process.
If the previous owner is not present
Make sure the device is powered on and connected to a Wi-Fi or cellular network. Then contact the previous owner and ask them to follow these steps:
Sign in to their iCloud account at www.icloud.com/find.
Select the device from their Find My iPhone device list by clicking All Devices at the top of the screen.
Erase the device by clicking the Erase button. This will erase all content and settings from the device. When prompted, do not enter a phone number or message. Click Next until the device is erased.
When the erase is complete, click "Remove from Account" to remove the device from the account.
After the device has been erased and removed from the account, you can proceed with the device setup process.
Apple iPhone 6 Plus
CDMA 800 / 1700 / 1900 / 2100 - A1522 (CDMA), A1524
3G Network HSDPA 850 / 900 / 1700 / 1900 / 2100 - A1522 (GSM), A1522 (CDMA), A1524
CDMA2000 1xEV-DO - A1522 (CDMA), A1524
TD-SCDMA 1900 / 2000 - A1524
4G Network LTE 700/800/850/900/1700/1800/1900/2100/2600 (1/2/3/4/5/7/8/13/17/18/19/20/25/26/28/29) - A1522 (GSM), A1522 (CDMA)
LTE 700/800/850/900/1800/1900/2100/2600
TD-LTE 1900/2300/2500/2600
(1/2/3/4/5/7/8/13/17/18/19/20/25/26/28/29/38/39/40/41) - A1524
SIM Nano-SIM
Announced 2014, September
Status Available. Released 2014, September
BODY Dimensions 158.1 x 77.8 x 7.1 mm (6.22 x 3.06 x 0.28 in)
Weight 172 g (6.07 oz)
- Fingerprint sensor (Touch ID)
- Apple Pay (Visa, MasterCard, AMEX certified)
DISPLAY Type LED-backlit IPS LCD, capacitive touchscreen, 16M colors
Size 1080 x 1920 pixels, 5.5 inches (~401 ppi pixel density)
Multitouch Yes
Protection Shatter proof glass, oleophobic coating
- Display Zoom
SOUND Alert types Vibration, proprietary ringtones
Loudspeaker Yes
3.5mm jack Yes
MEMORY Card slot No
Internal 16/64/128 GB, 1 GB RAM
DATA GPRS Yes
EDGE Yes
Speed DC-HSDPA, 42 Mbps; HSUPA, 5.76 Mbps; EV-DO Rev. A, up to 3.1 Mbps; LTE, Cat4, 150 Mbps DL, 50 Mbps UL
WLAN Wi-Fi 802.11 a/b/g/n/ac, dual-band, Wi-Fi hotspot
Bluetooth v4.0, A2DP, LE
NFC Yes (Apple Pay only)
USB v2.0
CAMERA Primary 8 MP, 3264 x 2448 pixels, optical image stabilization, phase detection autofocus, dual-LED (dual tone) flash
Features 1/3'' sensor size, 1.5µm pixel size, geo-tagging, simultaneous HD video and image recording, touch focus, face/smile detection, HDR (photo/panorama)
Video 1080p@60fps, 720p@240fps, optical stabilization
Secondary 1.2 MP, 720p@30fps, face detection, FaceTime over Wi-Fi or Cellular
FEATURES OS iOS 8
Chipset Apple A8
CPU Dual-core 1.4 GHz Cyclone (ARM v8-based)
GPU PowerVR GX6650 (hexa-core graphics)
Sensors Accelerometer, gyro, proximity, compass, barometer
Messaging iMessage, SMS (threaded view), MMS, Email, Push Email
Browser HTML5 (Safari)
Radio No
GPS Yes, with A-GPS, GLONASS
Java No
Colors Space Gray, Silver, Gold
- Active noise cancellation with dedicated mic
- AirDrop file sharing
- Siri natural language commands and dictation
- iCloud cloud service
- iCloud Keychain
- Twitter and Facebook integration
- TV-out
- Maps
- iBooks PDF reader
- Audio/video player/editor
- Organizer
- Document viewer/editor
- Photo viewer/editor
- Voice memo/dial/command
- Predictive text input
BATTERY Non-removable Li-Po 2915 mAh battery (11.1 Wh)
Stand-by (2G) / Up to 384 h (3G)
Talk time (2G) / Up to 24 h (3G)
Music play Up to 80 h
Wednesday, November 26, 2014
Galaxy S4 GT-I9500 Repair IMEI "NULL/NULL"
Necessary Files/ / Odin v3.07.zip;
/ / GT-i9500 fix_imei_null.zip;
- Open Odin
- Extract the. ZIP file, place the file in PDA [the phone has to be switched to Download Mode]
- Press START
- End! : -))
That's it, simple steps to retrieve the IMEI of S4, damaged by trying to change the imei with another model.
Note;If after these steps the imei still null/null then the problem is hardware,this tested on 2 phones with imei null,after write this file the imei back to original
http://www.mediafire.com/download/61..._imei_null_new
Tutorial to create Samsung s4 [i9500] file multy firmware by your own
No need to search for multi file hereafterDownload nd install cywinDownload here
* create a folder in c drive c/Newfolder Name the folder as MyWork or any
* copy the single file firmware into created folder
* Delete the.md5extension for example if yur file isi9300xxx xxx.tar.md5 ---> i9300xxx xxx.tar
* Extract the firmware using winrar
* Im trying on 4.4.2 i9500 single firmware I9500XXUFNC1_I9500ODDFNC1_I9500DDUFNA4_HOME
Run cygwin
Enter below given commnd
cd /cygdrive/c/mywork (Tis cmmd is for show the file path)
* Now yu hav to createBootloader,PDA,MODEM,CSC
Extracted files:
boot.img
cache.img
hidden.img
modem.bin
param.bin
recovery.img
sboot.bin
system.img
* NoW Bootloader files areboot.img,param.bin,sboot.bin
* PDA --->boot.img,param.bin,sboot.bin,recovery.img,system.i mg
* CSC --->cache.img, hidden.img
* Modem ---->modem.bin
Run below given cmmds to create Bootloader (command:tar -H ustar -c filename.img > filename.tar)
tar -H ustar -c boot.img param.bin sboot.bin > BOOTLOADER_I9500XXUFNC1.tar
For PDA
tar -H ustar -c boot.img param.bin sboot.bin recovery.img system.img > PDA_I9500XXUFNC1.tar
For CSC
tar -H ustar -c cache.img hidden.img system.img > CSC_I9500DDUFNA4.tar
For MODEM
tar -H ustar -c modem.bin > MODEM_I9500ODDFNC1.tar
.png)
NoW yu are done creating Odin flashable Tar files.
.png)
Commands :
md5sum -t filename.tar >> filename.tar
mv filename.tar filename.tar.md5
Example:
Run below given command after create .tar file example below
For Bootloader
md5sum -t BOOTLOADER_I9500XXUFNC1.tar >> BOOTLOADER_I9500XXUFNC1.tar
mv BOOTLOADER_I9500XXUFNC1.tar BOOTLOADER_I9500XXUFNC1.tar.md5
For PDA
md5sum -t PDA_I9500XXUFNC1.tar >> PDA_I9500XXUFNC1.tar
mv PDA_I9500XXUFNC1.tar PDA_I9500XXUFNC1.tar.md5
For CSC
md5sum -t CSC_I9500DDUFNA4.tar >> CSC_I9500DDUFNA4.tar
mv CSC_I9500DDUFNA4.tar CSC_I9500DDUFNA4.tar.md5
For MODEM
md5sum -t MODEM_I9500ODDFNC1.tar >> MODEM_I9500ODDFNC1.tar
mv MODEM_I9500ODDFNC1.tar MODEM_I9500ODDFNC1.tar.md5
.png)
I9500 flashing result with created firmware
